- Package / Case :
- Packaging :
- Switch Type :
- Operating Temperature :
- Part Status :
- Rds On (Typ) :
- Ausgewählter Filter :
6 Produkt
| Bild | Modell | Preis | Anzahl | Lager | Hersteller | Beschreibung | Package / Case | Series | Packaging | Input Type | Output Type | Number of Outputs | Features | Switch Type | Output Configuration | Operating Temperature | Part Status | Supplier Device Package | Interface | Ratio - Input:Output | Factory Stock | Minimum Quantity | Voltage - Supply (Vcc/Vdd) | Fault Protection | Rds On (Typ) | Voltage - Load | Current - Output (Max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
siehe | ON Semiconductor | MOSFET PWR N-CH 55V 2.6A DIE | Die | - | Tape & Reel (TR) | Non-Inverting | N-Channel | 1 | - | General Purpose | Low Side | -55°C ~ 150°C (TJ) | Obsolete | Die | On/Off | 1:01 | 0 | 3500 | Not Required | Over Voltage | 190 mOhm | 52V (Max) | 2.6A | |||
|
|
|
siehe | ON Semiconductor | MOSFET N-CH CLAMP 9A 52V DPAK | TO-252-3, DPak (2 Leads + Tab), SC-63 | Automotive, AEC-Q101 | Tape & Reel (TR) | Non-Inverting | N-Channel | 1 | - | Relay, Solenoid Driver | Low Side | -55°C ~ 175°C (TJ) | Obsolete | DPAK | On/Off | 1:01 | 0 | 2500 | Not Required | Over Voltage | 90 mOhm | 52V (Max) | 9A | |||
|
|
|
siehe | ON Semiconductor | MOSFET N-CH CLAMP 9A 52V DPAK | TO-252-3, DPak (2 Leads + Tab), SC-63 | Automotive, AEC-Q101 | Tube | Non-Inverting | N-Channel | 1 | - | Relay, Solenoid Driver | Low Side | -55°C ~ 175°C (TJ) | Obsolete | DPAK | On/Off | 1:01 | 0 | 1050 | Not Required | Over Voltage | 90 mOhm | 52V (Max) | 9A | |||
|
|
|
siehe | ON Semiconductor | MOSFET N-CH CLAMP 9A 52V DPAK | TO-252-3, DPak (2 Leads + Tab), SC-63 | Automotive, AEC-Q101 | Tube | Non-Inverting | N-Channel | 1 | - | Relay, Solenoid Driver | Low Side | -55°C ~ 175°C (TJ) | Obsolete | DPAK | On/Off | 1:01 | 0 | 1050 | Not Required | Over Voltage | 90 mOhm | 52V (Max) | 9A | |||
|
|
|
siehe | ON Semiconductor | MOSFET N-CH CLAMP 9A 52V DPAK | TO-252-3, DPak (2 Leads + Tab), SC-63 | Automotive, AEC-Q101 | Tape & Reel (TR) | Non-Inverting | N-Channel | 1 | - | Relay, Solenoid Driver | Low Side | -55°C ~ 175°C (TJ) | Obsolete | DPAK | On/Off | 1:01 | 0 | 2500 | Not Required | Over Voltage | 90 mOhm | 52V (Max) | 9A | |||
|
|
|
siehe | ON Semiconductor | MOSFET N-CH 52V 9A LL DPAK-3 | TO-252-3, DPak (2 Leads + Tab), SC-63 | Automotive, AEC-Q101 | Tape & Reel (TR) | Non-Inverting | N-Channel | 1 | - | Relay, Solenoid Driver | Low Side | -55°C ~ 175°C (TJ) | Active | DPAK | On/Off | 1:01 | 0 | 2500 | Not Required | Over Voltage | 90 mOhm | 52V (Max) | 9A |
1 / 1 Seite
